Makita DLX2176TJ 18 V Li-ion LXT 2 Piece Kit Combi Drill Impact Driver DHP481Z
- Regular price
- £364.99
- Sale price
- £364.99
- Regular price
-
- Unit price
- /per
Adding product to your cart
- Product Details
DLX2176TJ 18V Li-ion LXT Brushless 2 Piece Kit
Compact and Lightweight Kit
Comprising DHP481Z Combi Drill, DTD154Z Impact Driver, 2 x 5.0 Ah Li-ion batteries and charger in a Makpac case.
DHP481Z
18V Li-ion LXT Brushless Combi Drill
The DHP481Z is a Cordless Hammer Driver Drill powered by 18V Li-ion battery to deliver up to 2,100 rpm and 31,500 ipm with variable speed control by trigger. The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for a longer life and is electronically controlled to optimise battery energy use up to 50 per cent longer run time per charge.
The Hammer Driver Drill has 2 mechanical gears and variable speed transmission for a wide range of drilling, fastening and hammer drilling applications. It has a 13mm single sleeve keyless chuck to allow easy bit installation and removal and 21 clutch settings plus drill mode for added fastening control.
Features Battery fuel gauge, the power remaining in the battery can be indicated in 3 stages simply by pushing a button. 3 lights on, more than 50 per cent of full battery capacity. 2 lights on, 20 per cent to 50 per cent of full battery capacity and 1 light on, less than 20 per cent of full battery capacity.
Please Note:
Any accessories shown are not necessarily supplied as standard equipment.
Capacity
Maximum in masonry 16mm
Maximum in steel 13mm
Maximum in wood 76mm
Chuck capacity 1.5 to 13mm
Maximum fastening torque (soft joint) 60 Nm
Maximum fastening torque (hard joing) 115 Nm
DTD154Z
18V Li-ion LXT Brushless Impact Driver
Ultra-compact design.
The DTD154Z is a Cordless Impact Driver powered by 18V Li-ion battery, with electronic 3 stage impact power selection (hard / medium / soft) to deliver up to 3,600 rpm and 3,800 ipm, The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for a longer life and is electronically controlled to optimise battery energy use up to 50 per cent longer run time per charge.
The Impact Driver features T-Mode – Tightening Mode for self-drilling screw, has an automatic electronic controller that downshifts and reduces rotation and impact speed prior to driving screw into place, and is engineered to minimise screw thread stripping, screw breakage and damage to the work.
It has a ¼” hex chuck, LED job light, forward / reverse rotation, variable speed by trigger and electric brake.
Capacity:
Driving shank ¼”
Standard bolt M5 to M16
High tensile bolt M5 to M14
Machine screw M4 to M8
Coarse thread (length) 22 to 125mm
Impact selection 3 stage plus Tek mode
Please Note:
Any accessories shown are not necessarily supplied as standard equipment.